CS-RT05
- Wireless 802.11n router
- 300Mbps network speed
- Supports WEP, WPA, WPA2 security
Features:
- Complies with the IEEE 802.11b/g and IEEE802.11n draft 2.0 standards
- High data rate up to 300Mbps network speed.
- Supports WDS (Wireless Distributed System) repeater mode
- Supports AP client mode
- Supports WPS (Wi-Fi Protected Setup) function
- Supports hidden SSID function
- Supports WMM function to meet the multimedia data bandwidth requirement
- Supports 64/128-bit WEP, WPA, WPA2 wireless security
- Obtain WAN IP by PPPoE/DHCP/static IP/PPTP
- Integrated 10/100 Mbps LAN switch with Auto MDI/MDI-X support
- Provides DHCP server
- VPN pass through (L2TP/IPSec/PPTP)
- Supports virtual server, port forwarding and DMZ(demilitarized zone)
- Supports DDNS (dynamic DNS)
- Integrated anti-DOS firewall
- Provides MAC access control
- Supports UPNP (Universal Plug and Play)
- Supports system status (port connectivity) and remote log for network management
- Supports web-based configuration
- Firmware upgradeable via web browser
Technical specifications:
| Item | Description |
| Product | Wireless 802.11n Access Point Router |
| SoC + RF | Ralink RT3052 |
| Flash | 4 MB |
| RAM | 32MB |
| Antenna | Non-detachable 3dBi Antenna x 2 (2T2R MIMO Technology) |
| Wireless Features | Support IEEE 802.11g , 802.11b and 802.11n draft 2.0 Wireless Access Point |
| Superior wireless coverage and high performance, up to 300Mbps for wireless data rates | |
| Support WDS, AP, AP Client mode | |
| Maximum coverage distance | 100 m indoors; 300 m outdoors |
| Modulation Types Supported | OFDM: BPSK, QPSK, 16QAM, 64QAM, Proprietary MIMO modulation ( 11g ) |
| DSSS: DBPSK, DQPSK, CCK(11b) | |
| Data Rates Supported | IEEE 802.11b: 1, 2, 5.5 and 11 Mbps IEEE 802.11g : 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE 802.11n(draft 3.0): up to 300Mbps |
| Quality of Service (QoS) | IEEE 802.11e QoS |
| Wi-Fi alliance WMM (Wi-Fi Multimedia Enhancement) support | |
| Hardware-based priority queues | |
| Management Features | Firmware upgrade via HTTP |
| WAN and LAN side connection statistics | |
| Configuration of static routes and routing table | |
| Configuration of NAT / NAPT | |
| Selection of bridge or router mode | |
| PPP user ID and password | |
| Physical Interfaces | 4 x RJ-45 10/100Mbps LAN Ports 1 x RJ-45 WAN Port 1 x power jack 2 x detachable antennas |
| Router Features | DHCP server and client |
| NAPT (Network Address and Port Translation) | |
| NAT (Network Address Translation) | |
| ICMP (Internet Control Message Protocol) | |
| IGMP (Internet Group Management Protocol) | |
| DDNS (Dynamic Domain Name Service) | |
| Security Features | Password protected configuration access |
| User authentication (PAP / CHAP) with PPP | |
| Support 64/128-Bit WEP encryption, WPA-PSK, WPA2-PSK, WPS and 802.1x | |
| Ethernet Features | Compliant with IEEE 802.3 and 802.3u 10/100 Mbps |
| All Ethernet ports support auto-crossover (MDI/MDI-X) | |
| Power | 9VDC, 1A Single Range Switching Power Adapter |
| temperature | 0 ℃ to 40 ℃ (operating) – 20 ℃ to + 70 ℃ (storage) |
| humidity | 10% to 90% non-condensing (operating) 5% to 95% non-condensing (storage) |